EARSIGHT NANO - Stereo pair

NANO
80,00 €
In stock
1
Product Details

NO BATCH HERE, MICROPHONES ARE AVAILABLE

EACH ORDER INCLUDES:

  • 2x microphone EarSight Nano (stereo version)
  • 2X clips (easyly removables)
A new capsule for an even smaller microphone, the Earsight nano can be used as a lavalier microphone for stereo voice recording or hidden on a backpack for stealth recording without being noticed. It is also a really good option to increase your Gopro sound (with Gopro mic adapter not included and works only with PIP version).
If microphone size is important to you, this is the ideal mic. The same quality of manufacture as the Earsight, always assembled in France and tested before shipping.
The Comica CVM-MF1 windscreen is also compatible without the need for a 3D adapter like the standard Earsight. Very effective for nature recording, soundscapes, ASMR, binaural, travelling...


TWO VERSIONS AVAILABLE:

  • PAIRED MINI JACK VERSION (PIP): Compatible with microphone input recorder with plug in power or PIP function. (Olympus LS series, Tascam DR100 mkIII, Sony PCM D50 or D100 and many DSLR cameras)
  • PAIRED XLR VERSION (XLR 48v): For any recorder with a 48V phantom power supply. The body of the XLR connector is equipped with components to adjust the voltage to fit the microphone power needs. It can be used also in mono as a lavalier microphone.


EARSIGHT NANO TECHNICAL DATAS:

  • Capsule type: Electret Condenser paired stereo set
  • Directivity: Omni
  • Sensitivity: -27 dB
  • Signal-to-Noise Ratio: 77 dB
  • Frequency Range: 20Hz to 20kHz
  • Maximum SPL Input: 110 dB
  • Operating Temperature: -20°C->+70°C
  • Connector: NEUTRIK metak JACK OR XLR
  • Audiophile high grade audio capacitor FOR XLR VERSION
  • Cable reference: .Sommer Cable - low capacitance cable
  • Cable Diameter: .Ø2.6 mm outside diameter
  • Microphone diameter: Ø8mm
  • Cable capacitance : 65pF /m
  • Cable conductance: 0.14 ohm/m
  • Almost insensitive to RFI noise
  • Cable soldered directly to the capsule, no additional connectors like mini XLR to cause noise and failure.


MOUNTING OPTIONS:

Just clip the earsight nano microphones on everything thanks to the clips provided with microphones, you can tape them on everything, your imagination is the limit.


For all the information about using Earsight mics, you can go to the following page HOW TO USE EARSIGHT MICS / FAQ

Save this product for later
Assemblé en France