EarSight Nano microphones

A new capsule for an even smaller microphone, the Earsight nano can be used as a lavalier microphone for stereo voice recording or hidden on a backpack for stealth recording without being noticed.

The performance is very slightly inferior to the standard Earsight microphones, but not by much. If microphone size is important to you, this is the ideal mic.

The same quality of manufacture as the Earsight, always assembled in France and tested before shipping.

The Comica CVM-MF1 windscreen is also compatible without the need for a 3D adapter like the standard Earsight.

This capacity is very effective for nature recording, soundscapes, ASMR, binaural…


TWO VERSIONS AVAILABLE:

PAIRED MINI JACK VERSION (PIP):

Compatible with microphone input recorder with plug in power or PIP function. (Olympus LS series, Tascam DR100 mkIII, Sony PCM D50 or D100 and many DSLR cameras)

PAIRED XLR VERSION (XLR 48v):

For any recorder with a 48V phantom power supply. The body of the XLR connector is equipped with components to adjust the voltage to fit the microphone power needs. It can be used also in mono as a lavalier microphone.


TECHNICAL DATA:

Capsule type: ……………………Electret Condenser paired stereo set

Directivity:………………………….Omnidirectional

Sensitivity:………………………….-27 dB

Signal-to-Noise Ratio:……….77 dB

Frequency Range:………………20Hz to 20kHz

Maximum SPL Input :………..110 dB

Operating Temperature:……-20°C->+70°C

Connectors: ………………………..NEUTRIK for both XLR and mini jack Versions

XLR and PIP versions can be shipped in black or silver depending on availability.

ELNA Silmic II high grade audio capacitor for XLR Version

Cable Lenght:……………………..1.5m or 3m (custom lenght available on demand)

Cable reference:…………………Sommer Cable – Star quad – SC-Cicada 4

Cable Diameter:………………….4 x 0.14 connectors (Ø3.4 mm outside diameter)

Cable capacitance:……………. 75pF/m / 0.14 ohm/m

Low sensitivity to RFI noise

Assemblé en France

BUY :

Buy directly here or by direct email contact (for custom cable lenght)



Each microphone is assembled by hand by myself, I work alone which guarantees a constant quality, and I can adapt to your particular requests.
My status of autoentrepreneur (French specific status) allows me to guarantee the lowest price because I don’t have any employees or dedicated office.


RECOMMENDED WIND PROTECTION:

Wind protection recommended is Comica CVM-MF1.


SOUND SAMPLES (raw files from Zoom F6 recorder and Tascam DR100mkIII)


MOUNTING OPTIONS:

Just clip the microphones on everything thanks to the clips provided with microphones, you can tape them on everything, your imagination is the limit.


EarSight microphones are manufactured by Immersive Soundscapes in France, in small quantities. Each model is checked before shipping. It’s also possible to offer you adapted cable lenghts to suit your needs, do not hesitate to contact me for any specific request. immersivesoundscapes@gmail.com

Back to HOME

best equipment used for field recording

Conditions générales de vente